Showing 15 4 post lifts

Buying Advice

Choosing a 4-post car lift

A 4-post car lift, also called a four-post lift or 4-post ramp, has two drive-on runways supported by four columns. You drive the vehicle onto the runways, where it stays on its wheels rather than being lifted at the chassis. This makes a 4-post lift quick to load for servicing, underbody inspection, wheel alignment and parking.

Before choosing a model, check:

  • the work you need it for
  • which vehicles you work on
  • the available floor space and ceiling height
  • your workshop's power supply

Service lifts or wheel alignment lifts

Space has separate models for general servicing and wheel alignment.

  • Service lifts: the SQ350, SQ401, SQ405L, SQ501L and SQ800 have open runways for servicing, inspection and underbody work.
  • Wheel alignment lifts: the SQ402, SQ406L, SQ502L, SQ502LLT and SQ652L have alignment-ready runways for wheel alignment and chassis geometry work. The SQ402 also takes front turntables and rear slip plates.

An alignment lift works alongside a wheel aligner. See wheel alignment equipment.

Wheels-free work and secondary lifts

A 4-post lift keeps the vehicle on its wheels. For brake, suspension and tyre work, you need to lift the wheels clear of the runways.

The Space SQ502LLT has a built-in secondary scissor lift for this. On other models, a jacking beam can lift the vehicle off the runways. Liftmaster can check which jacking beam fits a particular lift.

Platform length and vehicle size

Platform length determines the longest vehicle a lift can take. Across this range, platforms run from 4,166mm on the BendPak HD9ST to 6,000mm on the Space SQ800.

  • Cars, SUVs and short wheelbase vans: Space SQ350, SQ401 and SQ402, with platforms from 4,300mm to 4,460mm.
  • Up to medium wheelbase vans: Space SQ405L and SQ406L, with 5,100mm platforms.
  • Up to long wheelbase vans:
    • Space SQ501L, SQ502L, SQ502LLT and SQ652L, with 5,700mm platforms
    • Space SQ800, with a 6,000mm platform

Check the platform length alongside the vehicles each model is rated to lift.

Lifting capacity

4-post vehicle lifts in this range run from the 3,500kg Space SQ350 to the 8,000kg Space SQ800. The other models have these capacities:

  • 4,000kg: Space SQ401, SQ402, SQ405L and SQ406L
  • 4,082kg: BendPak HD9ST and HD9XW
  • 5,000kg: Space SQ501L, SQ502L and SQ502LLT
  • 6,500kg: Space SQ652L

Choose a lift rated for the heaviest vehicle you work on.

Ceiling height, narrow bays and extra-height lifts

Height:

  • Maximum lifting height ranges from 1,892mm on the BendPak HD9ST to 2,210mm on the BendPak HD9XW.
  • Overall lift heights range from 2,235mm (HD9ST) to 2,874mm (Space SQ652L and SQ800).
  • Check the lift's overall height and allow room for your tallest vehicle when fully raised.

Narrow bays and taller vehicles:

  • The HD9ST has a narrow-width layout for smaller garages and compact vehicles.
  • The HD9XW has extended columns to accommodate taller vehicles.

Liftmaster checks the ceiling height, floor and power supply at the site survey before specifying a lift.

Single-phase or 3-phase power

Check whether your workshop has single-phase or 3-phase power before choosing a lift. The BendPak HD9ST and HD9XW run on a single-phase supply, while the Space models on this page need 3-phase.

Each product page lists the required power supply. Use the Power Supply filter above to show only the models your workshop can run.

Parking

4-post lifts for parking and storage

A 4-post lift keeps the vehicle on its wheels, which also makes it suitable for parking. The BendPak HD9ST can double as a parking lift for compact vehicles. The HD9XW's 2,210mm lifting height allows a taller vehicle to park underneath.

HD9 series accessories include:

  • solid decks
  • drip trays
  • extended approach ramps

For models built for parking, see parking lifts.

MOT

4-post lifts and MOT bays

An MOT bay must meet DVSA requirements for the class of vehicle being tested, including the use of approved testing equipment where required. Liftmaster supplies complete Class 4 MOT bays and Class 7 MOT bays. Liftmaster specifies the lift as part of the bay and takes the bay through to DVSA approval.

If you're planning an MOT bay, start with those bay pages rather than this lift range.

Installation and Service

4-post lifts supplied and fitted

Every 4-post car lift from Liftmaster comes with delivery, installation and a 2-year parts and labour warranty as standard. Liftmaster surveys the site first to check the floor, ceiling height and power supply.

Liftmaster's engineers install each lift to the manufacturer's specification and hand it over with:

  • a LOLER thorough examination certificate
  • installation records, technical data and a parts diagram

Planned maintenance contracts and a direct breakdown line are also available. See installation and servicing.

Brands

BendPak and Space 4-post lifts

Liftmaster is the sole UK distributor for BendPak. The BendPak 4-post lifts on this page are the narrow-width HD9ST and the extra-height HD9XW. Both are rated at 4,082kg and run on single-phase power. See the full BendPak range.

Space supplies service and wheel alignment models rated from 3,500kg to 8,000kg. See Space.

Lift Types

2-post, 4-post or scissor lift

  • 4-post lift: drive-on runways support the vehicle on its wheels. It is quick to load and suits servicing, wheel alignment and parking.
  • 2-post lift: raises the vehicle by its chassis, leaving the wheels free for brake, suspension, tyre and exhaust work.
  • Scissor lift: takes up the least floor space and suits tyre bays and bodyshops.

A workshop handling different types of work may use more than one type of lift.

4-post car lift questions

What is the difference between a 4-post lift and a 2-post lift?

A 4-post lift has two drive-on runways that support the vehicle on its wheels. A 2-post lift raises the vehicle by its chassis using four arms, leaving the wheels free. The 4-post lift is quicker to load for servicing, wheel alignment and parking. For wheels-free work on a 4-post lift, you need a jacking beam or a model with a secondary lift, such as the Space SQ502LLT.

Can you store a car on a 4-post lift?

Yes. A 4-post lift supports the vehicle on its wheels and can also be used for parking. Both the BendPak HD9ST and HD9XW can be used this way, with accessories including solid decks and drip trays. For dedicated parking models, see the parking lifts page.

Which 4-post lifts run on a single-phase supply?

The BendPak HD9ST and HD9XW run on a single-phase supply. Space models in this range need 3-phase power. Check the supply required on each product page or use the Power Supply filter to narrow the list.

Can a 4-post lift be used for wheel alignment?

Yes, for an alignment model. The Space SQ402, SQ406L, SQ502L, SQ502LLT and SQ652L have alignment-ready runways for wheel alignment. The SQ402 takes front turntables and rear slip plates. The lift works alongside a wheel aligner.

How much floor space does a 4-post lift need?

Overall lengths run from 5,029mm (Space SQ350) to 7,074mm (Space SQ502LLT). Overall widths, where listed, range from 3,155mm to 3,780mm. You also need room to open doors and work around the lift safely. Liftmaster checks the bay dimensions at the site survey.

Is installation included with a 4-post lift?

Yes. Every 4-post lift from Liftmaster includes:

  • delivery
  • installation by Liftmaster's engineers
  • a 2-year parts and labour warranty

Liftmaster also surveys the site beforehand to check the floor, ceiling height and power supply.

Are 4-post lifts safe?

Yes, provided the lift is installed to the manufacturer's specification, used within its rated capacity and examined under LOLER. Liftmaster's engineers install every 4-post lift and provide a LOLER thorough examination certificate at handover. Space service lifts such as the SQ401 and SQ501L hold their runways on mechanical safety locks at working height.

Find the right 4-post lift for your workshop

Send us your bay dimensions, ceiling height, power supply and the types of vehicles you work on. Liftmaster's team can recommend a lift and arrange a site survey.

Submit an Enquiry