Out of stock
Bendpak Quickjack Service Lift, c/w 4 x 50mm Blocks, & 4 x 76mm Blocks
QuickJack
6000TL
Bendpak Quickjack Service Lift, c/w 4 x 50mm Blocks, & 4 x 76mm Blocks
Price on applicationContact the team for a priceOut of stock
2,722kg (6,000lb) Lifting Capacity
The 6000TL system is rated to 2,722kg, with the TL range now lifting 1,000 lb more than the previous generation. That covers saloons, hatchbacks and lighter SUVs at a comfortable margin for regular home and workshop servicing.
940–1,524mm Lift Point Spread
The frames take vehicles with a lift point spread from 940mm to 1,524mm, set within a 1,778mm frame length and 279mm frame width. The short frames suit car-sized vehicles while still spreading wide enough to remain stable underneath.
610mm Lifting Height From a 76mm Profile
The frames lift to 610mm with the stackable blocks fitted, while sitting only 76mm off the floor when lowered. Low-profile sports cars and lowered suspension clear the frames without ramps.
Dual-Position Automatic Safety Locks
Each frame carries automatic safety locks that glide into place as it rises, then release with a simple flip when the vehicle is coming down. The frames are certified by the Automotive Lift Institute (ALI) to the industry’s recognised safety and performance standards.
Four 50mm and Four 76mm Rubber Blocks Included
The bundle is supplied with four 50mm (2in) medium blocks and four 76mm (3in) tall blocks, plus two frame-positioning handles. Stackable rubber blocks give a secure fit across a range of vehicle lift points without adding separate accessories.
Lightweight Frames, No Bolted Installation
Each 35kg frame can be rolled into position and stored vertically, and the detachable hydraulic power unit leaves no permanent fixings in the floor. The open-centre layout keeps the underside clear, unlike ramps or jack stands that obstruct the working area.
