
QuickJack 6000TLX 2,722kg Portable Car Lift
QuickJack
6000TLX
QuickJack 6000TLX 2,722kg Portable Car Lift
The BendPak 6000TLX is a 2,722kg portable car lift with extended frames built for vehicles whose lifting points sit beyond standard-length lifts. Its 1,930 x 279mm frames spread from 1,092mm to 1,676mm, reaching longer-wheelbase cars, SUVs and light-duty trucks, while the 76mm collapsed height keeps the frames low-profile between jobs. Supplied with four 50mm and four 76mm blocks, it lifts to 610mm stacked.
- Extended Frames
- Supplied with 50mm & 76mm Blocks
- SUVs, Light Trucks & Longer Wheelbases
2,722kg (6,000lb) Lifting Capacity
The 6000TLX is rated to 2,722kg (6,000 lb), matching the 6000-series capacity with the extended-reach frame. That covers the cars, SUVs and light-duty trucks that sit beyond the reach of standard-length portable lifts without stepping up to the 8000-series.
1,930mm Extended Frames, 43-66 Inch Spread
Each frame measures 1,930 x 279mm, six inches longer than the standard 6000TL frames, and the pair spreads from 1,092mm to 1,676mm (43 to 66 inches). The extra length reaches manufacturer-recommended lift points on longer-wheelbase cars, SUVs and light trucks.
610mm Lifting Height From a 76mm Profile
The frames lift to 610mm (24 inches) with the stackable blocks fitted, while sitting only 76mm off the floor when closed. That low-profile storage keeps QuickJack's roll-in-and-store practicality in garages and workshops with limited space.
Dual-Position Automatic Safety Locks
Each frame carries automatic safety locks that glide into place as it rises, giving two locked working positions without manual lock handling. The pressure-compensated flow divider and independent shut-off solenoids keep both frames moving together through the lift.
Four 50mm and Four 76mm Rubber Blocks Included
The bundle is supplied with four 50mm (2in) and four 76mm (3in) rubber blocks for flexible lifting points, plus a 110V or 208-240V single-phase power unit with pendant control. Factory preassembled hydraulics mean the system is ready to lift out of the box.
Lightweight Frames, No Bolted Installation
At 37kg per frame the 6000TLX can be rolled into position, used, and stored vertically between jobs, with no bolted installation and no permanent bay commitment. The open-centre design keeps the driveline and underbody accessible while it is raised.


